• State Resolved
  • Locked Locked
  • Replies 4 replies
  • Subscribers 53 subscribers
  • Views 566 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Uniflash v3 install problem

Quincey Stroud
Prodigy 20 points

Other Parts Discussed in Thread: UNIFLASH, CCSTUDIO

I'm trying to install Uniflash v3 on Windows 7.  When I run the uniflash setup I keep getting errors about 30 seconds after it starts.  In the logs it says "com.ti.ccstudio.p2app could not be found in the registry".  Is there a way to fix this issue?

  • 0
    Guru 192875 points
    Hi Quincey,

    Is there a way to fix this issue?

    First of all deactivate your anti-virus and firewall. Then run the setup by using the option "Run as Administrator". If still you get the above error, the setup file seem to have been corrupted. Try downloading the setup again, also try using some other downloader or browser.

    Regards,
    Gautam
  • 0
    TI__Mastermind 22060 points

    Hi Quincey,

    Please delete the contents of the install directory before you try to re-install. It looks like you have an incomplete installation.

    If this is not the case, please post install logs. Depending on the version of uniflash, you can find them in <installdir>/install_logs* or c:\program files\installjammer registry\uniflashv3 (program files (x86) if you're on a 64 bit computer). Note, the installjammer registry folder is a hidden folder.

    Danish

  • 0
    Prodigy 20 points
    Thanks guys. I have now installed it successfully. I had disabled the firewall but I wasn't running the setup as an administrator. Also, I think my biggest problem was not removing the install directory before trying the install again.

    Regards,
    Quincey
  • 0 in reply to Quincey Stroud
    Guru 192875 points
    That's Great, Quincey. Btw Please close the thread.

    Regards,
    Gautam