Other Parts Discussed in Thread: TMS320F28023, UNIFLASH
We are working on development system using MCU TMS320F28023.
So far using Windows 7 machine HP Pro Book4330S with CC uniflash version 3.1 we were able to program the board successfully.
With new machine with Windows 7 we are facing the problem. Error Log is as attached.
We also tried to use CCS6. We observed that debug session is getting lauhced but was not able to conenct to the target. What could be the problem.
HP MAchine is Pro Book430.
Regards,Error Log.docx
