How to laod .dat file?

He Zhang

Hi there,

I'm trying to load a .dat file in to CCS work space. It was generated from Matlab, containing coefficients as input argument for a filter function. I searched online and ccs help, but cannot find the way to load it. My CCS version is 6.0.1.

Can anyone help me out?

Thanks!

Rebecca

over 10 years ago

0 AartiG over 10 years ago

TI__Guru**** 173310 points

This question has been answered previously on the forums. Please see
http://e2e.ti.com/support/development_tools/code_composer_studio/f/81/p/405091/1435473#1435473

0 He Zhang over 10 years ago in reply to AartiG

Prodigy 80 points

Thanks, but I cannot click on "load memory" cause it's not accessible when I'm not in the debugging mode.

0 AartiG over 10 years ago in reply to He Zhang

TI__Guru**** 173310 points

You need to at least be connected to the target before you can view and load to memory. Please see this wiki topic on how you can manually launch the debugger. After you do that you can connect to the target and then load memory.

http://processors.wiki.ti.com/index.php/Debug_Handbook_for_CCS#Manual_launch

0 He Zhang over 10 years ago in reply to AartiG

Prodigy 80 points

Hey thanks, I read the wiki page but perhaps I didn't make my question clear. I want to read data out from dat.file, then save them in an array to test the filter function in my project.

Code Composer Studio™︎

Code Composer Studio forum

How to laod .dat file?