Stepping through C code with debugger

Robert Quinn

Is there a way to step through C code with the CCS5 debugger and a Spectrum Digital C2000 emulator? I can step through the assembly code but would like to step through the corresponding C code instead.

over 10 years ago

0 Ashish Kapania over 10 years ago

TI__Mastermind 21645 points

Hi Robert,

When the core is halted, CCS should automatically open the corresponding C code. In case CCS cannot find the source files (due to missing paths, etc.) it will complain and ask the user to point to the right source file (see e2e.ti.com/.../442846).

I think your question will be better answered on the CCS forums. I will get this post moved to the CCS forum.

Best,
Ashish

0 David Friedland over 10 years ago

TI__Mastermind 18320 points

Hi Robert,

I moved this thread over to the CCS forum in hopes that you can get more information there.

0 AartiG over 10 years ago in reply to David Friedland

TI__Guru**** 173310 points

This seems to be a duplicate of this thread: https://e2e.ti.com/support/development_tools/code_composer_studio/f/81/t/421002

Please continue the discussion in that thread if the issue is still unresolved.

Code Composer Studio™︎

Code Composer Studio forum

Stepping through C code with debugger