CCS UNIFLASH LINUX

Hi Shankar,

Check this wiki link: processors.wiki.ti.com/.../UniFlash_Quick_Start_Guide

Regards,
Gautam

Hi Gautam,

Thank you for reply

i worked uniflash tool in windows but linux pc first time,
my problem is windows configure static ip and shows device manager usb/ethernet rndis
but linux pc how to check and how to configure ??
i install uniflash tool in linux pc but lsusb command shows nothing decteded.
above provided link i did not undestand ,can u please expalain clearely ??

Regards,
shankar.

Shankar the above link in turn navigates to: processors.wiki.ti.com/.../Sitara_Linux_AM335x_Flash_Programming_Linux_Development

Regards,
Gautam

Hi Gautam,

   Thanks for your reply,

 I am trying to make install uniflash tool for linux ubuntu machine 12.04 which was installed successfully but problem was am335x based custom board not detected in linux PC, but I was able to see windows based PC. Please can you share the details about am335x custom board detection or beaglebone black.

Thanks & Regards

N Shankar   

Shankar,

Have you seen this wiki page: http://processors.wiki.ti.com/index.php/Sitara_Uniflash_Quick_Start_Guide

Hi AartiG,

     Thank you for your reply,  above link was working for windows PC procedure i.e working fine but I want CCS uniflash  procedure for ubunt 12.04 linux based PC, please share the details of CCS for linux.

Thanks

N shankar