Message while burning target with CCS 4.1

Jacob Fainguelernt

Hello,

I am using CCS 4.1. When I click "Debug Active Project", the project is buiIt, when the debug session is launched the following window appears:

After clicking "OK" the process continues and the message appears again. After clicking "OK" again the target is loaded, and the Debug session runs without any problems.

This problem happened both for Stellaris and MSP430.

I would like to know what should be done to avoid this message.

Thanks,

Jacob

over 16 years ago

JohnS over 16 years ago

TI__Guru**** 163035 points

Jacob,

Is the file present in \ccsv4\emulation\analysis?

Are you running 4.1.0, 4.1.1 or 4.1.2?

Thanks,

John

Jacob Fainguelernt over 16 years ago in reply to JohnS

TI__Intellectual 1160 points

John,

I didn't find it in \ccsv4\emulation\analysis.

I am using CCS 4.1.1.

Regards,

Jacob

DanRinkes over 16 years ago in reply to Jacob Fainguelernt

TI__Expert 8055 points

Jacob,

Can you check to see if this is in \ccsv4\emulation]analysis\bin? If it's not, it's obviously missing. I don't know why CCS would be trying to access it since it's not related to C2000 or MSP430. I've attached a version of the .dll. If it's missing from the directory above, you can drop this in that directory and see if the problem goes away.

Regards,

Dan

libbz2.zip

Code Composer Studio™︎

Code Composer Studio forum

Message while burning target with CCS 4.1