Compile error for LF2407 using CCS 3.3 Platnium

Guille

I'm having some compilation errors using CCS 3.3 Platnium. When I try to rebuild my .pjt file I get 32 errors saying "Build error cannot run DSPCL"

From what I found in previous cases (see link below).

https://e2e.ti.com/support/development_tools/code_composer_studio/f/81/t/76921

It seems like I'm missing a dspcl.exe in the bin folder for C2400.

If anyone has that file or knows a different approach, please let me know.

Thanks community,

Guillermo Mejia-Ruedell

over 10 years ago

0 Ki over 10 years ago

TI__Guru**** 472431 points

Hello,
What is the full version number of your CCS installation? To find the full version number, see the link below:
processors.wiki.ti.com/.../CCStudio_FAQ

Thanks
ki

0 Guille over 10 years ago in reply to Ki

Prodigy 75 points

Version 3.3.83.20

0 Ki over 10 years ago in reply to Guille

TI__Guru**** 472431 points

That version does not support C24x. You will need to get a version that does. Did you have a license for 3.3 that supported C24x?

Thanks
ki

0 Guille over 10 years ago in reply to Ki

Prodigy 75 points

I have a license for 3.3Platnium however I'm not sure if it supports C24x

0 Ki over 10 years ago in reply to Guille

TI__Guru**** 472431 points

I will send you a private message to sort this out.

Thanks
ki

0 Ki over 10 years ago in reply to Ki

TI__Guru**** 472431 points

This issue was resolved offline

Code Composer Studio™︎

Code Composer Studio forum

Compile error for LF2407 using CCS 3.3 Platnium