• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 53 subscribers
  • Views 414 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS v6.1 Editor Window disappears when using Hardware Trace

Ralf Goebel
Genius 3715 points

Hi,

I think I found a situation in which the Editor Window in CCS permanently diasppears:

  • Load and Run an application
  • Start the Hardware Trace Analyzer, e.g. PC Trace
  • Drag the "Trace Viewer" window into the main Editor Window
  • Restart CCS

After this sequence, I'm only able to get the Editor Window back by using a different Workspace.

Thanks,
Ralf

  • 0
    TI__Guru**** 161615 points
    Ralf,

    I believe I am able to reproduce what you are seeing. At first I was not able to see the problem. For me I had to close all other editor windows (other than the Trace Display) then I could see the problem after I restarted CCS. It has something to do with the fact that CCS closes the Trace Viewer automatically when you terminate a debug session. You might be able to hit this even without restarting CCS.

    I was able to get my editor area back by going to Window -> Navigation -> Switch to Editor. Click Select All then click the Close button. I had also clicked on the activate editor menu item. Since doing this I can't get the editor to go away completely.

    I will file a defect to trace the issue with the editor disappearing.

    Regards,
    John
  • 0 in reply to JohnS
    TI__Guru**** 161615 points
    The defect tracking id is: SDSCM00052222