Proteus .COFF file Create

Dharmendra Savaliya

Intellectual 700 points

Hello

i want to do simulation of PICCOLO in proteus ,which need .COFF file as input.

NOW How to create .COFF file in Code Composer Studio V6.1..

Thank YOU.

over 10 years ago

0 Gautam Iyer over 10 years ago

Guru 192875 points

Hi Dharam-paji,

I would instead suggest you to go for hex format. You can use Hex2000 utility to get hex file out of CCS that you can dump in proteus.
For more info on hex2000 simply search the forum.

Regards,
Gautam

0 Dharmendra Savaliya over 10 years ago in reply to Gautam Iyer

Intellectual 700 points

Sir,

i have already creates .HEX file from .OUT as in figure but Proteus have ERROR and It suggesting to load .COFF file.

After That i have loaded that To TOGGLE Gpio as figure below But it is not working..

0 Gautam Iyer over 10 years ago in reply to Dharmendra Savaliya

Guru 192875 points

.out itself is in COFF format.
Check this thread: e2e.ti.com/.../182100

Regards,
Gautam

Code Composer Studio™︎

Code Composer Studio forum

Proteus .COFF file Create