Testing tools for TMS320C6424

abdalla ali

I'm working in EVMC6424 and use CCS3.3 . I want to start my code testing ( unit test & code coverage test ). could you please suggest some testing tools ( open source / free license are preferable ) .

Note:

some sections of my code are board dependent ( e.g use the CODEC of the board)

Thanks in advanced

Abdo.

over 10 years ago

0 Ki over 10 years ago

TI__Guru**** 473961 points

Hi Abdo,
You will have much more luck looking for free 3rd party solutions if you move to the later CCS Eclipse based versions. CCSv3.3 used our own proprietary IDE and the number of 3rd part solutions that worked with it was more limited in number and usually not free.

Thanks
ki

0 abdalla ali over 10 years ago in reply to Ki

Intellectual 750 points

Hi
Thanks you ki . could you please name some of them ( not free license & 3rd part solutions)

Thanks
abdo

0 abdalla ali over 10 years ago in reply to Ki

Intellectual 750 points

Hi ki
Is it possible to integrate the CUNIT with code composer 3.3 & code composer 5.4
You can find the source code
sourceforge.net/.../

Thanks
Regards Abdalla

0 Ki over 10 years ago in reply to abdalla ali

TI__Guru**** 473961 points

CCSv5 is Eclipse based and there are CUnit type plug-ins for Eclipse so it should work. For example:
sourceforge.net/.../

I've never used it though so I can't comment much on it or provide much support.

I do know of other customers who have been using various commercial solutions with CCS. Some examples are VectorCast, ParaSoft, LDRA and Klocwork.

Thanks
ki

0 abdalla ali over 10 years ago in reply to Ki

Intellectual 750 points

Thanks A lot ki
Regards
Abdalla

Code Composer Studio™︎

Code Composer Studio forum

Testing tools for TMS320C6424