CCS OSX beta2 console message

abonyi zoltán

Hi all,

I am using the OSX beta release 2 on OSX 10.10.5 for Tiva-C TM4GHC123.

Yesterday I got a project with CCS console messages. I cannot run it. I got the following "error". Why I try to run the program, it every time stopped here.

Can you help me to run the program?

over 10 years ago

0 Ki over 10 years ago

TI__Guru**** 472331 points

hello,
The "error"is more of a warning that the debugger cannot find any associated source code for where the program is halted. Since it is halted inside a C I/O assembly routine, this makes sense.

the bigger question is why your program is getting stuck in the C I/O routine. I assume you are doing some C I/O in your program. There are a few suggestions in the below article:
processors.wiki.ti.com/.../Tips_for_using_printf

Hope this helps
ki

0 Ki over 10 years ago in reply to Ki

TI__Guru**** 472331 points

Ki-Soo Lee said:
the bigger question is why your program is getting stuck in the C I/O routine. I assume you are doing some C I/O in your program. There are a few suggestions in the below article:
processors.wiki.ti.com/.../Tips_for_using_printf

Forget this comment. I forgot that C I/O is broken on CCS MacOS X Beta 2:

http://processors.wiki.ti.com/index.php/MacOS_X_CCSv6_Beta#Debug

Code Composer Studio™︎

Code Composer Studio forum

CCS OSX beta2 console message