Other Parts Discussed in Thread: OMAPL138
Dear Code Composer Developers,
We are really in desperate need of polar plotting capabilities in Code Composer Studio, mostly to view/debug QAM constellations.
As far as I know, CCS 3.3 had this feature, but it seems to be removed from CCS 4 onwards.
Would it at all be possible to add this graphing feature to CCS? We you really appreciate this greatly!
Best regards
Hi,
Officially GUI Composer does not support C6000 - however, given its interface from inside CCS is very tied to the Debug session running, I created a simple application and was able to plot a simple scatter plot graph using the DSP of my OMAPL138 LCDK and a simple sinewave generator.
The sine graph above is printing two 512 single precision float arrays - in the picture above, data1 is a simple sequence of values, while results1 is the sinewave amplitude.
In this case, I suggest you to give this a shot and see if it works for you as well. I loosely followed the training material in the link below:
http://processors.wiki.ti.com/index.php/CCS_Modules_Library#GUI_Composer
Keep in mind that not all GUI Composer functionality may work for this specific target.
Cheers,
Rafael
