Cannot connect to USB FET with CCS 6.1.1, Windows 10 version 1511

Jim Lacenski

Other Parts Discussed in Thread: MSP-FET

Recently upgraded my Windows Home N system from Win 7 to Windows 10. Now cannot connect to USB FET: cannot find the FET. Devices look OK in Device Manager. CCS version 6.1.1.0002 . Windows 10 version 1511. Please let me know what logs I can send to assist troubleshooting.

over 9 years ago

Ki over 9 years ago

TI__Guru**** 464151 points

Hi Jim,
What device are you using? And are using an external MSP430 USB FET (black or grey one)?

Thanks
ki

Johannes Kokkila over 9 years ago in reply to Ki

Intellectual 275 points

I'm having quite similar problems except that I started with win 10 and my system has never worked... and I have not found solution.

My case has been discussed more here: Getting started with RF430FRL152EVM and CCS 6.1.1

https://e2e.ti.com/support/wireless_connectivity/f/667/p/478038/1723839#pi239031349=1

My equipments are:

RF430FRL152EVM
MSP-FET
TRF7970AEVM
CCS 6.1.1

Any ideas?

Johannes Kokkila over 9 years ago in reply to Johannes Kokkila

Intellectual 275 points

I installed the CCS on Win 7 computer. There the CCS suggested upgrading the MSP-FET firmware, which I did.
After that I was able to use MSP-FET normally with Win 10.

Code Composer Studio™︎

Code Composer Studio forum

Cannot connect to USB FET with CCS 6.1.1, Windows 10 version 1511