Using DSP/BIOS 5.20.05 with CC Studio v6

user4574099

Prodigy 20 points

I have downloaded and installed DSP/BIOS 5.20.05 from the TI website.

Is it possible to link this version of the DSP/BIOS to CC Studio v6 please?

I require it to build a project imported form CC Studio v3.3.

over 9 years ago

0 Ki over 9 years ago

TI__Guru**** 472151 points

Hello,
See: processors.wiki.ti.com/.../BIOS_Support_in_CCS_Eclipse

Thanks
ki

0 user4574099 over 9 years ago

Prodigy 20 points

Thanks for this, but I am wondering how I can get CC Studio v6 to detect that i have DSP/BIOS 5.20 installed?

0 Ki over 9 years ago in reply to user4574099

TI__Guru**** 472151 points

First off, I strongly recommend using CCSv5.5 at most. CCSv5 was better (though "better" is relative") with working with these very old DSP/BIOS versions.

In CCSv5, you can use the IDE preferences to point CCS to the location of your 5.20 BIOS installation do it gets detected:

Note that using BIOS 5.2 with any CCS version greater than 3.x was never officially tested and supported so use at your own risk...

Good luck!

Code Composer Studio™︎

Code Composer Studio forum

Using DSP/BIOS 5.20.05 with CC Studio v6