Programming in C++ in CCS on Tiva C TM4C123G

Sagar Shubham

Other Parts Discussed in Thread: TM4C123GH6PM

Hello,
I have a Tiva C TM4C123GH6PM Launchpad. I have been programming it in C for a while. However I wish to do so in C++. How can this be achieved?
While making a new CCS project,how can I make changes so that I can code in C++? I'm using CCS v5.
(My apologies in advance if I used any term incorrectly. Please point them out if there are any)

over 10 years ago

0 Amit Ashara over 10 years ago

TI__Guru**** 244440 points

Hello Sagar

The following links should be helpful resources to begin with.

processors.wiki.ti.com/.../Overview_of_C++_Support_in_TI_Compilers

processors.wiki.ti.com/.../Category:Cplusplus

Regards
Amit

0 Sagar Shubham over 10 years ago in reply to Amit Ashara

Prodigy 30 points

While making a new CCS project,how can I make changes so that I can code in C++?
What changes can be made there. I've tried to go through your links, yet I can't find a way to do that. I'm using CCS v5.
Thanks in advance.

0 Amit Ashara over 10 years ago in reply to Sagar Shubham

TI__Guru**** 244440 points

Hello Sagar

Your questions are not centric to TivaWare or TM4C devices but on C++ in CCS. I would suggest CCS Forum.

Regards
Amit

0 Ki over 10 years ago in reply to Sagar Shubham

TI__Guru**** 483431 points

Hello Sagar,

Sagar Shubham said:
While making a new CCS project,how can I make changes so that I can code in C++?

There is nothing special you need to do from a CCS project perspective. You just create/add your C++ source to the project. If the file extension is recognized as a C++ extension (like *.cpp), it will be treated as a C++ file.

Thanks

Code Composer Studio™︎

Code Composer Studio forum

Programming in C++ in CCS on Tiva C TM4C123G