• Locked Locked
  • Replies 1 reply
  • Subscribers 52 subscribers
  • Views 490 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Need configuration to generate hex file that support Mikroprog programmer for tiva using Code Composer Studio Version: 6.1.0.00104.

Rajesh Gupta
Intellectual 300 points

Dear TI team,

I am using Mikroprog programmer for the TIva using CCS ver 6.1

After debugging the hex file into the MCU it is not working, Please advise if there is any configuration setting or what can we implement to make it working,

Regards

Rajesh Gupta

  • TI__Guru**** 173310 points

    Rajesh Gupta said:
    Please advise if there is any configuration setting or what can we implement to make it working,

    This is really dependent on what the hex programmer is expecting to see as input. 

    This wiki page provides some general guidelines, but the requirement could vary based on the hex programmer (Note: I am not familiar with Mikroprog programmer so cannot provide more exact specifics).