Regarding CCS software for windows 7

Gaurav Singhal

i was using windows xp platform for ccsv3.1(TMS320c6713 kit) now i want switch to windows 7 -64 bit.could you please suggest me a version compatible with windows 7(64-bits) and share a link to download.

Better if you provide me some tutorials regarding that software so that it will help me to switch easily.

Best Regards

Gaurav Singhal

over 10 years ago

0 Gautam Iyer over 10 years ago

Guru 192875 points

Hi Gaurav,

I would not recommend you to try the same. Though you can try the compatibility mode in Win7.

Regards,
Gautam

0 Ki over 10 years ago

TI__Guru**** 480331 points

Hi Gaurav,
Every version of CCS after v3 supports Windows 7. I strongly suggest the latest version (CCSv6).

Thanks
ki

0 Ki over 10 years ago in reply to Ki

TI__Guru**** 480331 points

As for a migration guide, see:
software-dl.ti.com/ccs/esd/training/CCSv5-FromCCSv3.pdf

It is for moving from v3 to v5 but much of it also applies to v6.

0 Gaurav Singhal over 10 years ago in reply to Ki

Prodigy 50 points

Hi Lee

Thanks for your Replies

My kit is now working with XP.

i have another query that i need to apply 3 parameters sine fiiting algorithm on two different samples obtained from ADCs for measurment of amplitude and phase.

can u help me to write the code for that .

Thanks

Gaurav Singhal

0 Ki over 10 years ago in reply to Gaurav Singhal

TI__Guru**** 480331 points

Gaurav Singhal said:
i have another query that i need to apply 3 parameters sine fiiting algorithm on two different samples obtained from ADCs for measurment of amplitude and phase.

I suggest asking in the C67x forums. The experts there can provide the best suggestions:

http://e2e.ti.com/support/dsp/tms320c6000_high_performance_dsps/f/115

Thanks

Code Composer Studio™︎

Code Composer Studio forum

Regarding CCS software for windows 7