• State Resolved
  • Locked Locked
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 53 subscribers
  • Views 669 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Request for TI Cloud tools training

Hossein Pirhady
Prodigy 30 points

Other Parts Discussed in Thread: LAUNCHXL-F28069M, EK-TM4C1294XL, CONTROLSUITE

Hello everyone

Recently I found TI Cloud tools and it was excited me. I want to know is there any training resource for that? My second question is about supported devices. When I click on the link below, I see "LAUNCHXL-F28069M" is fully supported with TI cloud tools, but I don't know how to add it to my IDE. 

http://processors.wiki.ti.com/index.php/TI_Cloud_Agent#Supported_Devices

with regards,

Hossein

  • 0
    TI__Guru**** 173310 points

    Hossein,

    After you login to the TI Cloud Tools, if you go to the "Getting Started" tab, there is a lot of great information there to help you get started, including some tutorial videos. Hope this helps!

  • 0 in reply to AartiG
    Prodigy 30 points
    Thanks AartiG

    I checked the "getting started" tutorial and videos you mentioned. I found them very useful and my EK-TM4C1294XL works great. But for starting some control application I need to use C2000 series and specifically the "LAUNCHXL-F28069M". Because I am in first steps, I want to check the hardware and software with cheap options like TI Cloud Tools. Is there any other alternative?
  • 0 in reply to Hossein Pirhady
    TI__Guru**** 173310 points

    Hossein Pirhady said:
    But for starting some control application I need to use C2000 series and specifically the "LAUNCHXL-F28069M".

    That LaunchPad is supported with TI Cloud Tools. I would suggest starting with one of the examples from ControlSuite, which you can import from Resource Explorer.

     

  • 0 in reply to AartiG
    Prodigy 30 points
    Thanks AartiG for quick reply.

    I checked TI cloud tools resource explorer (from http://dev.ti.com/tirex/#/) and didn't find my answer. But when I check CCS Desktop tools and its resource explorer that you suggested, finally I got what you were trying to tell me. I also found Power suite and how to connect it to my launchpad. I think from know it's just matter of time to start learning.

    Once again thanks for your support.