• State Resolved
  • Locked Locked
  • Replies 4 replies
  • Subscribers 55 subscribers
  • Views 4377 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Autocomplete not working

Robert Z
Prodigy 155 points


Hi,

I am using CCSv6.1.2. Autocomplete doesn't work any more for one c file from my project. I tried to copy the code from the file to a new file, create a new project, and make a new workspace. These don't help.

Does anybody experience this?

Regards, 

  • 0
    TI__Guru**** 472441 points
    Hi Robert,
    Try rebuilding the index. See slide 37 of the below presentation:
    software-dl.ti.com/ccs/esd/training/CCSv6-TipsAndTricks.pptx

    Thanks
    ki
  • 0 in reply to Ki
    Expert 1635 points

    Hi there,

    Auto complete is not working on my CCS either.  I checked the indexer setup and it is enabled and the options look right. Interestingly enough, I remember a problem that CCSv6 had with the indexer consisting in the whole IDE getting locked forever (only solution been killing the process) if the indexer was working and one tried to close the project at the same time.

    I am currently using CCS v7.1.0.00015 running natively over 64-bit Kubuntu v16.10.

    I would appreciate any hint that may help to bring this good friend back.

    Pibe

  • 0 in reply to Pibe
    Expert 1635 points

    Yesterday (03/27/17) there was a CCS update for Linux. The version now is 7.1.0.00016. Unfortunately, the problem has not being resolved though. I would like to know from TI if this is a known issue for this version. Thanks.

    Pibe

  • 0 in reply to Pibe
    TI__Guru**** 472441 points
    This is not a known issue to us. I am using Ubuntu 16.04 LTS 64-bit and it seems to work fine. I will try it with some other test cases however. Does this issue occur with only some projects or does it happen all the time for any project?