CC25xx with cc Studio in replace of IAR workbench

gaurav badgujar

Prodigy 85 points

Other Parts Discussed in Thread: CC2541

I'm using the ccs v7 freeware version.

can anybody tell me that i can program the cc2541 (soc) in cc studio v7 in replace of IAR workbench?

I'm having the cc2541 mini development kit with me.

I want to work on I2C and SPI over the cc2541 in CC studio v7

if yes

what should i do.?

please reply

over 9 years ago

0 Ki over 9 years ago

TI__Guru**** 467491 points

Sorry, the CC2541 is not supported by CCS.

ki

0 gaurav badgujar over 9 years ago in reply to Ki

Prodigy 85 points

Ok, I'll do that.

I'm using the Hal libraries for programming. But at very little steps.
can you please give me any reference that from where i can do the programs on my own.
I've Ble stack installed

thanks for your reply

0 Ki over 9 years ago in reply to gaurav badgujar

TI__Guru**** 467491 points

I would recommend posting in the device forum relevant to your device:
e2e.ti.com/.../538

The experts there can help you best.

Good luck!
ki

Code Composer Studio™︎

Code Composer Studio forum

CC25xx with cc Studio in replace of IAR workbench