cannot find file "configPkg/linker.cmd" Buck_VMC_F28069M

Kutlu ZUNGUR

Hi,

I am importing the BUCK_VMC_F28069M project from Resource Explorer to CCS.When i try building project ccs gives the following error "cannot find configPkg/linker.cmd"

Any suggestion on how to fix this and build the project?

Thanks,

Kutlu

over 9 years ago

0 Kutlu ZUNGUR over 9 years ago

Prodigy 120 points

Hi All,
Am i at a wrong place for this CCS issue?If so could you let me know where to ask this.

0 Kutlu ZUNGUR over 9 years ago in reply to Kutlu ZUNGUR

Prodigy 120 points

I think i found a solution to this issue by adding "$<" to the end of "Command-line pattern:" under Project Properties / Build / XDCTools;
The final Command Line pattern shall be: ${command} ${flags} ${inputs} "$<"

0 Ki over 9 years ago in reply to Kutlu ZUNGUR

TI__Guru**** 451401 points

Thank you for the update.

Are you by chance using Windows with Turkish regional settings? If so, you are likely running into the know issue described in the thread below:
e2e.ti.com/.../1764476

Thanks
ki

Code Composer Studio™︎

Code Composer Studio forum

cannot find file "configPkg/linker.cmd" Buck_VMC_F28069M