CCS line end CR/LF

A Myasoedov

Prodigy 130 points

Is it possible to instruct Editor to use CR/LF at end of line, not only LF?

I'm using Code Composer 6.1.1

over 9 years ago

0 176-671 over 9 years ago

Expert 1240 points

Hi,

Check: stackoverflow.com/.../eclipse-and-windows-newlines

--Cheers

0 Ki over 9 years ago

TI__Guru**** 472431 points

Hello,
Are you using CCS on Linux? It should default to CRLF on Windows. If you are on Linux it will be LF. You can change the default under 'Window -> Preferences -> General -> Workspace' for the text file line delimiter

Hope this helps
ki

0 A Myasoedov over 9 years ago in reply to Ki

Prodigy 130 points

No, I use CCS in Windows.

Yes, the default settings are CP1251 and CR/LF.
But after I've edited my file I've seen CR/LF in some lines and LF in other ones. The LF was in lines added in CCS.
But I am not shure about original formatting of the file...

The Intellectual's answer was very useful, after delimiters converting it is CR/LF everywhere, and in new added lines too.

0 Robert Chen over 9 years ago in reply to A Myasoedov

Mastermind 9125 points

Hi,

You might not agree with me, but I would like to suggest you to use LF only i.e. Unix delimiter.

Please see my blog article for the reason.

Code Composer Studio™︎

Code Composer Studio forum

CCS line end CR/LF