connecting the msp430 sensor attached to a tm4c129xl launchpad

Raymond Walcott

Hey, good day, I am having problems connecting the msp430 sensor attached to a tm4c129xl launchpad to code composer studio 6. Could you lay out the steps to run the msp430 sensor attach to the tm4c129xl. I keep finding different tutorials online which is kind of confusing.

over 10 years ago

0 Markel Robregado over 10 years ago

Guru 86865 points

Hi Raymond,

Provide more details. What msp430 sensor? Which peripheral of the tm4c129xl launchpad do you connect the msp430 sensor?

What exactly does your project do?

- kel

0 Raymond Walcott over 10 years ago in reply to Markel Robregado

Prodigy 250 points

Good day, I am talking about attaching the msp430 capacitive touch boosterpack to the top of the tm4c129 launch pad . I can attach the msp 430 capacititve touchboosterpack to the tm4c129 launchpad and plug in the usb port but the led lights on the msp430 capacitive touch boosterpack wouldn't come on. The configurations that I found online are for a msp launchpad not tm4c129 launchpad.

0 Markel Robregado over 10 years ago in reply to Raymond Walcott

Guru 86865 points

Hi Raymond,

There are no example program at Tivaware for tm4c129xl launchpad + msp430 capacitive touch boosterpack which you can use. If there is one for msp430 launchpad then you need to port it to work for tm4c129xl launchpad.

- kel

Code Composer Studio™︎

Code Composer Studio forum

connecting the msp430 sensor attached to a tm4c129xl launchpad