• Locked Locked
  • Replies 1 reply
  • Subscribers 53 subscribers
  • Views 644 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Hangup problem in CCS 6.1.2 on exit from debugging session.

user426983
Prodigy 90 points
Other Parts Discussed in Thread: AM1808

The issue seems to be very similar to the previous thread on "CCS V6 Terminate Debug Hangs" however, it is different in that

1: Under Windows 7, Pro

2: Using CCS 6.1.2

3: attached to Olimex TMS100v3 

4: device under test is AM1808 SOM board (using free license)

As with the other thread, on exit from debugging session, something goes wrong. The next time I try to debug, it hangs, usually with 'getting license' in the current action display. I have tried the suggested 'switch to CCS Edit, recompile and reload program on prompt. This does not solve the hangup. FTDI drivers seem to be current (update drivers in device manager). 

  • TI__Guru**** 173310 points

    Could you please capture a debug server log (as described in this post)? Enable the logging just prior to terminating the debug session so the log file does not get too large. Then zip up and attach that log and any crash dump files generated. We could take a look to see if those provides any clues.