Accessing the floating point unit's registers in CCS3.3

Michael Nguyen

I am converting some of the fixed-point (assembly code) math libraries to floating point math for the F28335. I am running CCS3.3.82.13.

As I started debugging session, I found out that the floating-point registers were not readily available for viewing/modification in CCS.

I would appreciate any help.

Regards,

Michael

over 16 years ago

0 Michael Nguyen over 16 years ago

Prodigy 200 points

I just found out that the FP registers are available from the GEL tab :-)

Michael.

0 JohnS over 16 years ago in reply to Michael Nguyen

TI__Guru**** 163055 points

In v4 they are available in the register view, but yes in v3.3 you need to use the "Watch FPU Registers" menu item on the GEL menu and they will be added to the watch window.

John

Code Composer Studio™︎

Code Composer Studio forum

Accessing the floating point unit's registers in CCS3.3