OpenMp TMS320F28377D

yacine ould

Other Parts Discussed in Thread: TMS320F28377D, CONTROLSUITE

Hello,

I'm using a TMS320F28377D with code composer studio V6 and i would like to know if it's possible to use the parallel programation with OpenMP ( gcc compiler) ?

Or any possibility to use independently the two core of the DSP ?

thx for your answers

over 9 years ago

0 desouza over 9 years ago

TI__Guru**** 171729 points

Hi,

Unfortunately TI's implementation of OpenMP does not support C28x devices, and as far as I know there are no GCC compilers for the C28x family of devices.

processors.wiki.ti.com/.../OpenMP_Accelerator_Model_User's_Guide

As for examples of dual and independent programming, ControlSUITE has a few, as indicated in the thread below:

e2e.ti.com/.../477510

Hope this helps,
Rafael

0 yacine ould over 9 years ago in reply to desouza

Prodigy 130 points

Hi Rafael,

Thank you for your answers !

Code Composer Studio™︎

Code Composer Studio forum

OpenMp TMS320F28377D