what are the steps to be followed for on chip flash programming in CCS debugger mode with Tool menu

shankar hiregadad said:

Please anybody can u insist me what are the steps to be followed to flash the code.

You can simply click the 'Debug" icon when you are in the CCS Edit perspective. If the project is already set up to load code to Flash (ControlSuite usually has an example that loads and runs from Flash), clicking that icon will automatically build the code (if needed), and load it to Flash.

If you are new to CCS, these resources might be helpful to get started: 

http://processors.wiki.ti.com/index.php/C2000_Getting_Started_with_Code_Composer_Studio_v5

http://processors.wiki.ti.com/index.php/CCS_Fundamentals_Workshop