No source available for "0x3ff8cd"

Ianosh Grigoriani

Other Parts Discussed in Thread: CONTROLSUITE

Hello

Please help me . I can`t to run any programs. Even programs from control suite. When I press button start execution of program it don`t show me cursor and when I stop execution, it shows me "No source available for "0x3ff8cd" "

Please help me , don`t understand , what is wrong??

Regards

Yanosh

over 9 years ago

0 George Mock over 9 years ago

TI__Guru**** 253220 points

Your program is executing in some uncontrolled manner. When you finally stop it, the PC happens to be 0x3ff8cd. CCS attempts to show you the source code which corresponds to this address. However, there is no source code for that address. So CCS emits this diagnostic. I'm sorry this explanation isn't helpful. But it is the limit of what I can tell you.

Thanks and regards,

-George

0 Ianosh Grigoriani over 9 years ago in reply to George Mock

Prodigy 150 points

Thank you George for answer.
How do you think what to do for to solve this problem? Is it PC problem or windows7?
Yanosh

0 George Mock over 9 years ago in reply to Ianosh Grigoriani

TI__Guru**** 253220 points

Unfortunately, I don't know the cause of your problem. Since you mention controlSUITE, I presume you use a C2000 device. Please visit this wiki page for some ideas on how to get started. Once you have a better guess at what is wrong, you may want to post in the C2000 device forum.

Thanks and regards,

-George

0 Ianosh Grigoriani over 9 years ago in reply to George Mock

Prodigy 150 points

OK Thank you

Code Composer Studio™︎

Code Composer Studio forum

No source available for "0x3ff8cd"