• Locked Locked
  • Replies 1 reply
  • Subscribers 53 subscribers
  • Views 503 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Using PRU on Beaglebone black

R D
Prodigy 20 points

I am very new to CCS.

I have started programming the PRU on beaglebone black with the help of the link below:

processors.wiki.ti.com/.../PRU_Training:_Hands-on_Labs

but as mentioned step 6 i am unable to add the AM335x_PRU.cmd file.It shows a message could not add file.

whats the reason for this?

am i supposed to install some other software before doing this? 

  • TI__Guru**** 451311 points
    If the file physically exists on your machine, then it should just work. Can you try dragging and dropping the file into the project in Project Explorer?

    Thanks
    ki