Stop FlashingLeds. Help me please!

Simona Meucci

Hello! I'm new. I recently purchase a Experimenter's kit Delfino F28335. I began with FlashingLeds example and CCS 6.0.1

Now I try to install the Experimenter's kit in another PC but as soon as I connect the USB cable to the new PC, the led starts blinking even if I had Stopped it on the old Computer.

How can I fix? Any suggestion?

Thanks

over 9 years ago

0 desouza over 9 years ago

TI__Guru**** 171729 points

Hi,

This is normal. Most probably your FlashingLeds example project was configured to write the code to non-volatile Flash memory of your F28335.

Being non-volatile, the code will start to run as soon as the device is powered up.

Despite this, you can use CCS to connect to your device in the other PC and debug it without a problem.

Hope this helps,
Rafael

0 Simona Meucci over 9 years ago in reply to desouza

Prodigy 20 points

Thank you! I solved the problem by following your advice!!

Code Composer Studio™︎

Code Composer Studio forum

Stop FlashingLeds. Help me please!