CCS/LAUNCHXL-F28377S: Problem while interfacing with MATLAB Simulink through controlsuite

Ron Carter

Prodigy 45 points

Part Number: LAUNCHXL-F28377S
Other Parts Discussed in Thread: CONTROLSUITE

Tool/software: Code Composer Studio

Hello,

I'm facing a problem while trying to validate the controlsuite 3.4.4 from MATLAB Simulink 2015b.

This is the problem I've encountered.

Kindly provide me a solution.

over 9 years ago

desouza over 9 years ago

TI__Guru**** 171809 points

Hi,

Please contact Mathworks to get support for Matlab and Simulink. They are much better equipped to provide meaningful answers to your question.

Regards,
Rafael

Ron Carter over 9 years ago in reply to desouza

Prodigy 45 points

Thanks very much for your reply.....

Brian McKay over 9 years ago in reply to Ron Carter

Mastermind 9005 points

Ron,

Not sure if you have multiple versions of ControlSUITE installed - but the MathWorks support package isn't finding the correct one to match CCSv6, and is asking you to browse to that directory.

I suspect you need something more generic like C:\ti\controlSUITE\ which is what I have on my R2015b install. But I also don't have multiple versions, so YMMV.

If you still have issues, please contact MathWorks Technical Support.

And to get back to the configuration setup screens, type targetupdater at the MATLAB command line.

-Brian

desouza over 9 years ago in reply to Brian McKay

TI__Guru**** 171809 points

Brian,

Thank you for jumping to the rescue. I will keep your contact in my mind for any upcoming questions about Mathworks that arrive here.

Regards,
Rafael

Ron Carter over 9 years ago in reply to Brian McKay

Prodigy 45 points

Brian,

Thanks for your reply.

I'm using only one version of ControlSUITE i.e) ControlSUITE 3.4.4.

I would have reinstalled it at least 3 times, still facing the same issue.

Brian McKay over 9 years ago in reply to Ron Carter

Mastermind 9005 points

I'm still out - please contact MathWorks Tech Support. https://www.mathworks.com/support/contact_us/

-b

Pavares Kiatsuarpanon over 9 years ago

Prodigy 40 points

In control suite installation folder. Open "Release Notes.txt" and change "v 3.4.4" to "v3.4.4".

Ron Carter over 9 years ago in reply to Pavares Kiatsuarpanon

Prodigy 45 points

This works thanks......

But now I'm getting another problem like...

"Header/source file location not provided correctly "

Even though I've given the correct location to v160 in controlsuite.

If anyone can help me that would be great....

Regards,

Ron Carter

Brian McKay over 9 years ago in reply to Ron Carter

Mastermind 9005 points

I'm not sure about the header/source file location bit. Please contact MathWorks Tech Support - they may have an answer readily available to help with this.

Code Composer Studio™︎

Code Composer Studio forum

CCS/LAUNCHXL-F28377S: Problem while interfacing with MATLAB Simulink through controlsuite