• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 52 subscribers
  • Views 273 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Peripheral configuration

Terje Nilsen
Intellectual 275 points

Back in the CC2.21 days we had a visual method inside CC to configure peripherals like I2C, UART, MCBSP etc. etc.

This disapared somware around CC3.3...

 

How or what tools do we use today to simplify the hardware configuration of the peripherals?

 

Terje

  • 0
    TI__Guru**** 463481 points

    I think you are referring to when the BIOS configuration tool also supported configuring peripherals through the same graphical interface. It was removed sometime between v2 and v3 and it still remains the case. In the future we plan on some tools to graphically configure peripherals for some devices but currently is not supported.

    ki