• Locked Locked
  • Replies 1 reply
  • Subscribers 52 subscribers
  • Views 562 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/TMS320F28335: CCS/TMS320F28335

Hemant Jain44
Prodigy 10 points
Part Number: TMS320F28335

Tool/software: Code Composer Studio

Hello Sir,I am trying to run the Sci echoback program>and i have successfully connected the terminal on CCS Studio.But i am unable to input the character which i want to echo back and get displayed on to the terminal window in CCS.Can u please help me out b y guiding me from the Steps to rectify any mistakes done while connection or inputting the terminal.I am attaching the screen shot of the terminal window too.

At the terminal side,I am unable to input the character please help me out.

  • TI__Guru**** 173310 points

    Hemant Jain44 said:
    I am attaching the screen shot of the terminal window too.

    Unfortunately your screenshot did not come through properly.

    Without more details I cannot tell why the Terminal program in CCS is not working properly but perhaps you could try using Hyperterminal instead? The example code, in fact, suggests Hyperterminal and even provides the configuration to be used with it (mentioned in the comments at the top of the source file)