CCS/TMDX5535EZDSP: tmdx5535dsp programming by ccs-v7

Kshama Jain

Prodigy 80 points

Part Number: TMDX5535EZDSP

Tool/software: Code Composer Studio

How to program tmdx5535dsp by ccs-v7?

over 8 years ago

0 Ki over 8 years ago

TI__Guru**** 472451 points

Hello,
Can you provide more details on what you are trying to do? Do you already have an executable and wish to load it to your EZDSP? Or are you looking for help on how to get started with your target in regards to creating projects, building and such?

Thanks
ki

0 Kshama Jain over 8 years ago in reply to Ki

Prodigy 80 points

Thanks ki, for your reply.
My ultimate aim is to detect, check and save fingerprints in the form of array matrix using TMDX5535EZDSP. At this time I am just learning basic CCS coding. I want to know that, does CCS supports TMDX5535EZDSP or I have to use an older version?
From where will I get the information about CCS commands, libraries etc?

0 Ki over 8 years ago in reply to Kshama Jain

TI__Guru**** 472451 points

Yes, CCSv7 does provide support for the C5535EZDSP.

See the below link:
processors.wiki.ti.com/.../Category:CCS_Training

While there is not a lot of C5535 targeted training material, many of the generic material will apply to the C5535 (basic projects, debug, scripting, etc).

Also check out the various guides and examples from Spectrum Digital:
support.spectrumdigital.com/.../

Thanks
ki

Code Composer Studio™︎

Code Composer Studio forum

CCS/TMDX5535EZDSP: tmdx5535dsp programming by ccs-v7