CCS/CC3200-LAUNCHXL: How to run profiler for cc3200 on ccsv6 after importing Energia sketch

Hi,

There is another more recent thread where you seem to have passed the error while building the project. Is that a correct assessment or you still need help with this?
e2e.ti.com/.../571650

Regards,
Rafael

Hi,

Hi,

I visited the link mentioned by you.

I am using CCSv6, but I could not find any such menu i.e. Run>CLOCk>Enable in ccs.

Can you please guide as to where this menu is present.

Is it in ccs edit or ccs simple?

I am not able to find the menu in both of above.

Agam gupta said:

I am using CCSv6, but I could not find any such menu i.e. Run>CLOCk>Enable in ccs.

The CC3200 is a Cortex-M4 based device.

In CCS the profile clock is disabled for Cortex-M devices. As a work-around you should be able to use a "Count Event" breakpoint - see the Clocking Features Wiki entry. While the referenced Wiki entry was written for Stellaris devices I think it is also applicable to the CC3200.