• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 54 subscribers
  • Views 435 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/AM3358: PRU LAB 1 CCS target config question

Mike Colasono
Prodigy 20 points
Part Number: AM3358
Other Parts Discussed in Thread: TMDSEMU110-U, TMDSEMU200-U

Tool/software: Code Composer Studio

I'm connecting a Beaglebone Black to the host through the USB mini on the BBB. I'd post the error, but I'm not sure I selected the right emulator for that connection. I remember perhaps, not being able to find a gel file.

So I've been using eclipse to drag files over to the BBB and compile them there. What do I need to do?

TIA

Mike

  • 0
    TI__Guru**** 171309 points
    Mike,

    BeagleBone Black does not have a built-in JTAG debug probe - you will need one purchased separately, such as the TMDSEMU100V2U-20T, TMDSEMU200-U or the soon-to-be-released TMDSEMU110-U. You will also need to solder a small 20-pin connector to the board.

    Details are shown in several references on the web, and a good one is:

    blog.parr.us/.../

    Hope this helps,
    Rafael