• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 56 subscribers
  • Views 616 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/RM57L843: Flashing Issue

Arun Raikar
Prodigy 80 points
Part Number: RM57L843
Other Parts Discussed in Thread: UNIFLASH,

Tool/software: Code Composer Studio

Hi All.

Through USB510L JTAG EMULATOR part no BH-USB-510L, is it possible to flash firmware through Uniflash, I saw in net USB510L will support for RM57L843.

please see in below link http://www.blackhawk-dsp.com/support/DeviceList.aspx?EMU_FILTER=usb510l

which shows it will support above IC

so installed uniflash but USB510L is not in the list please find the attachement

Thanks and Regards.

  • 0
    TI__Guru 59540 points
    Hello Arun,

    I haven't any experience using the XDS510L emulator so I can't speak to its compatibility to the RM57Lx devices. However, the bigger question here is if the TI tools such as Uniflash or CCS support the integration of this emulator and associated drivers. given this bigger picture, I am moving the thread to the CCS E2E so our tool chain experts can respond.
  • 0 in reply to Chuck Davenport
    TI__Guru**** 162885 points
    Arun,

    Blackhawk 510L debug probes are not currently supported by UniFlash. They are supported by Code Composer Studio but not UniFlash at this time.

    Regards,
    John
  • 0 in reply to JohnS
    TI__Genius 16510 points

    UniFlash v3 does support the debug probe/device combination you are looking for if you want to use that.  The latest v3 version is available from the Wiki page. We expect to have the ability to add additional debug probe support in an upcoming UniFlash v4 release.