Booting the processor using CCS V 4.x

Shilpa Deepak

Other Parts Discussed in Thread: TMS320F2812

Hi All,

I am using TMS320F2812 DSP for designing my application and have a customised target board which is pretty easy.

I use CCS V4 to execute algorithms on the DSP.Now,I am planning to execute the booting algorithms on CCS v4.x

Hence,I request you to tell me the procedure for booting using CCS v4.Let me inform you that I am a new user to CCS.

Thanks,

Shilpa

0 desouza over 15 years ago

Shilpa,

Please check the threads below that discuss the process of modifying and writing your code to use flash memory:

This other thread contains several references about the F28x flash memory:

Hope this helps,

Rafael

0 Lori Heustess over 15 years ago in reply to desouza

This Wiki article may help as well:

-Lori

Code Composer Studio forum