CCS/TMS320F28027: TMS320F28027

Kalpesh Kolhe

Part Number: TMS320F28027
Other Parts Discussed in Thread: CONTROLSUITE

Tool/software: Code Composer Studio

Hello,

I was trying to run the Single channel SIN generator from the control suite,but when i debuged and connect target it says "No source available for 0x3ff7bf".I am not able to view the sine wave.

Could you help me?

Thank you so much.

Kalpesh

over 8 years ago

0 Ki over 8 years ago

TI__Guru**** 472221 points

Hello,
This is not necessarily an error depending on your environment. See the thread below:
e2e.ti.com/.../490463

Thanks
ki

0 Kalpesh Kolhe over 8 years ago in reply to Ki

Intellectual 265 points

Ki-Soo Lee,

Then how should i proceed...I followed the same procedure for loading the code in DSP...What steps should i follow to run this example??
Please advise.

Thank You

0 Ki over 8 years ago in reply to Kalpesh Kolhe

TI__Guru**** 472221 points

regarding the message, there is nothing for you to do. It is not an error but simply an information message telling you that you are halted at a program address where there is no source code correlation.

If the controlSUITE example is not running as expected, then it is recommended that you try posting in the C2000 forum. The experts there are best familiar with controlSUITE

Thanks
ki

Code Composer Studio™︎

Code Composer Studio forum

CCS/TMS320F28027: TMS320F28027