CCS4 MSP430 information memory being erased

Lauren

Other Parts Discussed in Thread: MSP430F2418

The environment CCS4 Version: 4.1.2.00027 and current target MSP430F2418.

The information memory (along with the main memory) on the target is being erased when a new program is loaded for debugging. I know there's a check box somewhere in Eclipse that, if unchecked, doesn't erase the information memory during loading. I even stumbled on it a week or so ago. My question is, where in the heck is it? I've looked at what would seem to be the obvious places and some not so with no success. A pointer to where it can be found would be much appreciated.

Thanks,

Lauren

over 15 years ago

0 AartiG over 15 years ago

TI__Guru**** 173310 points

Right-click on the project, go to Debug Properties. It is under Target tab->MSP430 Properties. See attached screenshot

ccs_target.doc

0 Ki over 15 years ago

TI__Guru**** 449981 points

Hi Lauren,

Go to 'Windows->Preferences' and type in 'MSP430' in the filter field. This will find the MSP430 Properties page for you and you can adjust the settings for the Erase Options.

Doing it this way will apply whatever changes globally. You can also do this to apply to just that debug session from the 'Tools->Debugger Options'

Thanks

0 Lauren over 15 years ago in reply to Ki

Prodigy 20 points

Ki,

That worked a treat, thanks! It must have been the 'Tools->Debugger...' that I stumbled on a while ago.

Lauren

Code Composer Studio™︎

Code Composer Studio forum

CCS4 MSP430 information memory being erased