• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 54 subscribers
  • Views 342 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/TMS320C6748: CCS

bhuvana
Prodigy 100 points
Part Number: TMS320C6748


Tool/software: Code Composer Studio

Hello,

I m a beginner to this dsp kit world.As I created my own model of Simulink and converted to embedded c code using embedded coder.Is it possible to view the simulated result in CCS without connecting the DSP processor kit??The ccs project created is build successfully.But, I m getting the error while debugging ..Error connecting to the target..my question is cant we observe the waveforms in the ccs without connecting the dsp board??Please suggest some procedure to observe the result waveform…

Thanking you,

Regards,

Bhuvana

student

  • 0
    TI__Guru**** 474261 points
    Hello,
    Simulators are no longer supported. We recommend using an actual hardware target. If you insist on using a simulator, you can try using the one that comes with the old CCSv5.5. But we will not be able to provide much assistance if you run into issues using it since we no longer support them.

    Thanks
    ki