CCS: TMDSEMU110-U　can build on CCS v5 project?

user4320928

Prodigy 20 points

Other Parts Discussed in Thread: TMDSEMU110-U, AM3357

Tool/software: Code Composer Studio

TMDSEMU110-U　can build on CCS v5 project?

I used CCS v5.5.0.

But TMDSEMU110-U needs CCS v7.

www.ti.com/.../TMDSEMU110-U

Can I build or debug on CCS v5.5.0 project with TMDSEMU110-U ?

Target is AM3357.

over 9 years ago

0 Ki over 9 years ago

TI__Guru**** 483541 points

Hello,
CCSv7 is strongly recommended if you wish to use it with the XDS110. You can also use it with CCSv6.1+ as long as you update your emulation pack to the latest. It is not support on earlier CCS versions.

Thanks
ki

0 Ki over 9 years ago in reply to Ki

TI__Guru**** 483541 points

To expand on my last post, the XDS110 would be used for debug. So it has no impact on building your project in CCSv5. You just can't use it for debug in CCSv5.

Thanks
ki

0 user4320928 over 9 years ago in reply to Ki

Prodigy 20 points

Thank you,ki.
It's a question additionally.
Is it possible to install the ROM made in CCS v5 in this using XDS100?

0 Ki over 9 years ago in reply to user4320928

TI__Guru**** 483541 points

If you are asking if it is possible to flash your Sitara device with the flash image created from CCS using an XDS100, yes, it is possible

Code Composer Studio™︎

Code Composer Studio forum

CCS: TMDSEMU110-U　can build on CCS v5 project?

Code Composer Studio™︎

Code Composer Studio forum

CCS: TMDSEMU110-U can build on CCS v5 project?

CCS: TMDSEMU110-U　can build on CCS v5 project?