Compiler/MSP-FET430UIF: MSP-FET430UIF not detecting

Rajesh Gupta

Part Number: MSP-FET430UIF
Other Parts Discussed in Thread: MSPDS, MSP-FET

Tool/software: TI C/C++ Compiler

Dear Team,

We were using Elptronic tool and MSP-FET430UIF debugger, while bebugger asked for upgradation of firmware, we downgrade it. Since than the MSP-FET430UIF is not working at all, no detection.

Please advise how we can resolve this.

Best regards

Rajesh Gupta

over 8 years ago

0 Ryan Brown1 over 8 years ago

TI__Guru**** 219487 points

Rajesh,

Try using the MSPDS Debugger Up- and Downgrade tool: processors.wiki.ti.com/.../MSPDS_Debugger_Up-_and_Downgrade

Or you can attempt to revive it with a new firmware update using the CCS or IAR IDEs. Note that the MSP-FET430UIF is NRND (Not Recommended for New Designs) and could not be supported depending on the Elprotronic version used. We recommend switching to the newer MSP-FET.

Regards,
Ryan

Code Composer Studio™︎

Code Composer Studio forum

Compiler/MSP-FET430UIF: MSP-FET430UIF not detecting