CCS: CCS vs and CSL 3.0.6

Paolo Martinetti

Expert 2730 points

Tool/software: Code Composer Studio

Hi everybody,

I'm new to CCSv6.

I'd like to test CSL v 3.0.6 on eZdsp demo board.

I have created a project, the compiler options are ok, but there are problems with linking CSL 3.0.6.

I don't know how to configure the linking options. I have searched the documentation but i found nothing helpful.

Any tip?

Thanks in advance

over 8 years ago

0 Ki over 8 years ago

TI__Guru**** 472391 points

Hello Paolo,
What device are you working with?

Thanks
ki

0 Paolo Martinetti over 8 years ago in reply to Ki

Expert 2730 points

Sorry,
C5515

undefined first referenced
symbol in file
--------- ----------------
_GPIO_open ./main.obj

error #10234-D: unresolved symbols remain
error #10010: errors encountered during linking; "DC2017_1.out" not built

>> Compilation failure
makefile:140: recipe for target 'DC2017_1.out' failed
gmake: *** [DC2017_1.out] Error 1
gmake: Target 'all' not remade because of errors.

**** Build Finished ****

0 Ki over 8 years ago in reply to Paolo Martinetti

TI__Guru**** 472391 points

Can you post the linker errors you are getting?

Thanks
ki

0 Paolo Martinetti over 8 years ago in reply to Ki

Expert 2730 points

undefined first referenced
symbol in file
--------- ----------------
_GPIO_open ./main.obj

error #10234-D: unresolved symbols remain
error #10010: errors encountered during linking; "DC2017_1.out" not built

>> Compilation failure
makefile:140: recipe for target 'DC2017_1.out' failed
gmake: *** [DC2017_1.out] Error 1
gmake: Target 'all' not remade because of errors.

**** Build Finished ****

0 Paolo Martinetti over 8 years ago in reply to Paolo Martinetti

Expert 2730 points

I have added C55XXCSL_LP in include search path and i have solved

Thanks
Paolo

Code Composer Studio™︎

Code Composer Studio forum

CCS: CCS vs and CSL 3.0.6