Appleton board debugging

Chandan Dutta

Prodigy 110 points

I am a new user and using appleton board. please share me some details about debugging tools.

1. How to check the DSP status.

2. How to write to DSP memory from external interface(forcefully crash DSP).

3. How to analyze the DSP core(how to load the core to CCS, how to get the values of the global variables etc).

If there are some documents about the debugging utilities or debugging steps please share the link.

Thanks in advance..

over 8 years ago

0 desouza over 8 years ago

TI__Guru**** 171349 points

Hi,

Despite I don't have an Appleton board, your questions seem to require a familiarity with both the project and the debug functionalities of CCS.

In this case I would strongly suggest you to read the following references:

For debugging capabilities:
processors.wiki.ti.com/.../Debug_Handbook_for_CCS

A complementary read to understand how the build process is tied to the debug functionality:
processors.wiki.ti.com/.../Projects_and_Build_Handbook_for_CCS

If you are looking for more specific device-centric details about the debugging process, I strongly recommend you to check the experts at the device forum.

Hope this helps,
Rafael

Code Composer Studio™︎

Code Composer Studio forum

Appleton board debugging