• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 53 subscribers
  • Views 722 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/CODECOMPOSER: Reference Project gives error 'Program make not found'

Manoj Rohit
Intellectual 530 points
Part Number: CODECOMPOSER


Tool/software: Code Composer Studio

Hello,

I have downloaded the sloa227 Firmware (http://www.ti.com/tool/DLP-7970ABP. ) and imported in CC Studio.

1) I have imported the Project named "F5529LP_TRF7970A_ALL_NFC_MODES". I have imported from "C:\ti\nfc\TRF7970A_RW_1.03.00\examples\boards\MSP-EXP430F5529LP\F5529LP_TRF7970A_ALL_NFC_MODES".

2)  I tried to build the Project but I am ending up with two Errors 'Make not found in path'.  I have attached a Screen shot indicating the Project.

Would I have to make a new Project and import all the files again? Evn that didnt work.

Thank you in advance.

Sincerely,

Manoj