CCS/TMDSLCDK138: TMDSLCDK138

Itzhak Kroin

Part Number: TMDSLCDK138
Other Parts Discussed in Thread: SYSBIOS

Tool/software: Code Composer Studio

Hi,

Trying to config UIA. When a new project selected as SYS/BIOS typ w cfg and UIA is checked, it ask for configuration with a clear field. what should I put there.

Itzhak

over 8 years ago

0 ToddMullanix over 8 years ago

TI__Guru* 96960 points

Itzhak,

Can you include a snapshot?

Todd

0 Itzhak Kroin over 8 years ago in reply to ToddMullanix

Intellectual 670 points

Hi Todd,

Following analysis config request file snapshot:

Regards,

Itzhak

0 ToddMullanix over 8 years ago in reply to Itzhak Kroin

TI__Guru* 96960 points

The way this tool works is read log records from the target. The loggers must be from UIA. For example LoggerStopmode. LoggerBuf is not supported by the tool. The easiest way to add a UIA logger is to include ti.uia.sysbios.LoggingSetup into you .cfg file (and remove LoggerBuf).

Code Composer Studio™︎

Code Composer Studio forum

CCS/TMDSLCDK138: TMDSLCDK138