DFU Interface support for Uniflash Cloud?

Christopher Hall

Other Parts Discussed in Thread: UNIFLASH

Tool/software: Code Composer Studio

Hi,

Are there any plans to support the DFU interface (specifically for TIVA) in the Cloud-based Uniflash tool?

If not, then I would like to submit this as a feature request. This interface was supported in LM_FLASH_PROGRAMMER and (I believe) in the desktop version of Uniflash as well, but I don't see it in the Cloud version:

Thanks,
Chris

over 8 years ago

0 Ki over 8 years ago

TI__Guru**** 450031 points

Hi Chris,
It was supported in UniFlash v3 desktop on Windows. It is not supported on UniFlash v4 (both Desktop and Cloud) as of yet. I'll get an update on the current status for this and reply back.

Thanks
ki

0 Ki over 8 years ago in reply to Ki

TI__Guru**** 450031 points

Hi Chris,
We are planning to add support for this for Windows. I filed a request for this. Tracking ID: UNIFLASH-888

Thanks
ki

0 Christopher Hall over 8 years ago in reply to Ki

TI__Mastermind 44670 points

Thanks Ki!

Is there is anywhere I can subscribe to updates about this tool to know when this feature has been added?

Thanks and best regards,
Chris

0 Ki over 8 years ago

TI__Guru**** 450031 points

FYI: UNIFLASH-888 is planned to be addressed in UniFlash 7.3.0 release (end of the year)

Note that it will likely just support Windows for now (like it was in UniFlash v3)

Thanks
ki

Code Composer Studio™︎

Code Composer Studio forum

DFU Interface support for Uniflash Cloud?