CCS4 for EVB-AM3517 debug

Ofer Eilon

Other Parts Discussed in Thread: AM3517

I have the EVB- AM3517 connected with Blackhawk USB100v2 JTAG and in the CCS4 (4.2.0.09000) there is no target configuration for the AM3517.

Please advice how to configure the AM3517 JTAG in CCS4.

Thanks,

Ofer

over 15 years ago

0 AartiG over 15 years ago

TI__Guru**** 173310 points

Ofer,

Please take a look at this post: http://e2e.ti.com/support/dsp/sitara_arm174_microprocessors/f/416/t/54713.aspx which has a .ccxml (target configuration) file you can use.

You should be able to use that board configuration but would need to change the emulator.

0 Ofer Eilon over 15 years ago in reply to AartiG

Intellectual 320 points

Hi Aarti,

Could you send me the whole project (BSL tests) with sources for EVM-AM3517 that I will be able to import to CCS4 for checking my enviroment and setup.

Thanks,

Ofer

0 AartiG over 15 years ago in reply to Ofer Eilon

TI__Guru**** 173310 points

Ofer,

Please post this question to the AM35x forum as they will be able to help better with pointing you in the right direction to get you what you need.
http://e2e.ti.com/support/dsp/sitara_arm174_microprocessors/f/416.aspx

0 Ofer Eilon over 15 years ago in reply to AartiG

Intellectual 320 points

Could you please send me the whole project (BSL tests) with sources for EVM-AM3517 that I will be able to import to CCS4 for checking my enviroment and setup?

Also where can I find NAND Flash writer by JTAG?

Thanks,

Ofer

0 guo kaixin over 14 years ago

Prodigy 110 points

Ｈｉ　

Ｉ　ｈａｖｅ　ｔｈｅ　ｓａｍｅ　ｑｕｅｓｔｉｏｎ　ｗｉｔｈ　ｙｏｕ　．Ｗｈｅｔｈｅｒ　ｙｏｕ　ｈａｖｅ　ｓｏｌｖｅｄ　ｔｈｉｓ　ｐｒｏｂｌｅｍ，ａｎｄ　

ｈｏｗ　ｔｏ　ｄｏ　ｉｔ？

Ｔｈａｎｋｓ．

Code Composer Studio™︎

Code Composer Studio forum

CCS4 for EVB-AM3517 debug