• State Resolved
  • Locked Locked
  • Replies 7 replies
  • Answers 1 answer
  • Subscribers 53 subscribers
  • Views 1788 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/TMDSLCDK6748: CCS 7.3.0 fails to launch on Win 10

Iqbal Singh Josan
Prodigy 190 points
Part Number: TMDSLCDK6748

Tool/software: Code Composer Studio

I installed full CCS 7.3.0 on a fresh install install of Win 10; followed by install of Code Gen Tools; and C6SDK.  Now CCS fails to launch and gives an error in log file:

........!MESSAGE An error occurred while automatically activating bundle org.eclipse.core.resources (102)......

I have also XDS100v2 emulator USB cable, but the board is not powered on.

Please advise how to fix this issue CCS 7.3.0?

Thanks

Iqbal

  • 0
    TI__Guru**** 450261 points

    Hello Iqbal,

    Iqbal Singh Josan said:
    I installed full CCS 7.3.0 on a fresh install install of Win 10; followed by install of Code Gen Tools; and C6SDK.

    Just a few questions:

    -Sounds like this was the first installation of CCS on this fresh Win 10 installation (there was not a previous version of CCS installed). Is that correct?

    -When was the first time you ran CCS? Did you try before installing the code gen and SDK or was it after?

    -Did you run into any issues during the installation (any errors/warning)?

    -What path did you install CCS?

    -What path is your workspace folder?

    Thanks

    ki

  • 0 in reply to Ki
    Prodigy 190 points

    Hello Ki,

    - Yes, that is correct; there was no previous version of CCS.

    - I tried CCS before installing the code gen SDK, and it was coming up; then I tried after I had installed code gen, SDK,; then it started throwing errors, and never came up.

    - There were no issues, errors, warnings during installation

    - installed in default path; C:\ti

    - workspace folder is in  C:\users\iqbal

    Iqbal

  • 0 in reply to Iqbal Singh Josan
    TI__Guru**** 450261 points

    Iqbal Singh Josan said:
    - I tried CCS before installing the code gen SDK, and it was coming up; then I tried after I had installed code gen, SDK,; then it started throwing errors, and never came up.

    That is interesting. can you point me to the code gen and SDK you installed? Did you try cleaning your workspace folder or do you not even get to point where you are prompted for one?

    Thanks

    ki

  • 0 in reply to Ki
    Prodigy 190 points

    I installed Code Gen Tools, ver 8.2.1 installer; and bios_c6sdk_02_00_00_00. I did get prompt for workspace; but after I select workspace, I was getting errors.

    However, I did not clean up workspace before trying again.

    Are you asking me to clean up work space (i.e. delete all files in C:\Users\Iqbal\workspace_v7); before attempting to launch CCS again?

    Please advise.

    Thanks

    Iqbal

  • 0 in reply to Iqbal Singh Josan
    TI__Guru**** 450261 points

    Iqbal Singh Josan said:

    However, I did not clean up workspace before trying again.

    Are you asking me to clean up work space (i.e. delete all files in C:\Users\Iqbal\workspace_v7); before attempting to launch CCS again?

    yes please. You can simply select a new (empty) workspace location when prompted.

    Thanks

    ki

  • 0 in reply to Ki
    TI__Guru**** 450261 points
    Hello,
    I haven’t heard back from you, I’m assuming you were able to resolve your issue. If not, please provide post a reply with an update below (or create a new thread).

    thanks,
    ki
  • 0 in reply to Ki
    Prodigy 190 points

    Ki,

    Thanks for checking back with me. I was able to resolve the issue.

    Iqbal